We us the finest equipment here at FSD for the highest quality glass!

We use the finest equipment her at FSD. Take a Look!

Click here to see Bottero 810 BCS

Click here to see Bottero 353 BCS

Click here to see Bottero 710

Click here to see Bottero Pratica GLP

Click here to see SouthTech glass tempering furnace

Take a look at our gallery!

                                            Click here to view Gallery

Design Tips!

DESIGN TIP#1

Never design a curb (the sill that is under the door area) on an angle. This applies to 135 degree standard angle enclosures, 90 degree enclosures, as well as custom angle enclosure openings. Always design a curb so the door can swing freely in and out. The only way to do this is by making the curb hit the return knee wall or angle sill at 90 degrees (square).

                                   
                                    Click to see more design tips!

FAQ

• Can I measure and install a frameless shower enclosure or do I need a professional to do it?
  With the proper guidance and support from us, there is no reason why you should have any problem measuring or installing. We do insist that the installation must be a two person affair. All of our installation crews have two people per truck to install every frameless shower door enclosure. If measured properly, (our technical support team will make sure you do!) your custom frameless shower enclosure will require no fabrication on your part making the installation process a breeze. Always keep in mind you are working with glass. It is safety tempered but still glass. Go slow, be safe and watch our measuring and installation video’s that were made just for you, the do it-yourselfers who want a custom made American frameless shower enclosure at a whole sale price.

  COLLAPSE [-]
• Is there such a thing as a standard size frameless shower door?
  The Chinese glass industry has imported standard size, square cut thick glass frameless shower doors that are 28” X 72” or 28” X 78”. We're here to tell you that they don't work because they are mass produced, cut square, and they do not conform to your wall or sill. Why would you buy a square cut standard size Chinese door that will leave you with large gaps or hinge binding when you can buy a custom American made shower door for the same price or less! All of our raw glass sheets are made by PPG Industries, an American manufacturer of raw float glass. It is shipped from Pennsylvania to our manufacturing facility here in South Florida where each piece is cut to your own individual specifications for your bathroom. It’s like a custom tailored suit that was hand made by us to fit only you.

  COLLAPSE [-]
• Why do most shower door companies insist on using u-channel framing and you don’t?
  The myth of u-channel. Are your frameless shower doors and enclosures really frameless?

  U CHANNEL, CLIPS OR HEADERS, OH MY!

  "THE MYTH OF "U" CHANNEL."

  Let’s get right to it. Please do not let anyone or any company tell you that you need “u” channel, because you don’t! The whole purpose of a frameless shower enclosure is to NOT have a frame, and by cutting, mitering, screwing and gluing an aluminum metal frame (U channel) around the entire perimeter of your custom “frameless” shower enclosure, you have just created a framed shower enclosure. Makes no sense, does it?

  Let me tell you why some or most on-line or retail shower door and glass companies insist you use these “U” channels (frames) around your beautiful, thick glass.

  1. They do not have the skill, patience or confidence in themselves to measure or their heavy glass manufacturing suppliers (none of these companies buy their glass from a facility or company that only builds and fabricates just custom frameless shower doors because we are the only ones, and we won’t sell to them!) that attempt to fabricate an “out-of-square”, custom piece of glass just don’t know how to do it. This is because mostly all heavy glass manufacturers are trained and used too cutting just square cut glass for things like table tops or thick window panes or wait! Frameless shower doors that have a “u” channel frame around it.
  2. They themselves do not fabricate and temper the glass so how can they guarantee it is going to fit. That is unless they tell you that you need an ugly, ¾” thick “u”channel frame around it that allows them to have ¾” of an inch adjustment to hide any and all mistakes. Are you getting the picture yet…?
  3. They will also tell you that it looks cleaner than clips and it’s easier to install when in fact nothing could be further than the truth. Fact is it takes a lot more time and effort to measure, cut, miter, glue and piece together this frame (u channel) and then anchor and screw it(be sure you don’t place the glass on top of the screw heads sticking up or you are going to have a big nightmare on your hands, and head) around your entire shower opening then installing a couple of clips that were specifically engineered to secure a frameless shower enclosure thru the glass (not rest in it) and into the tile. Hmmmm
  4. They will also tell you it performs the same function as clips (clamps) when it fact it does not even come close. U channel is a frame that YOU MUST FABRICATE AND INSTALL. Once you are done spending your entire day performing this useless task, you then slip your thick, heavy custom made glass into this frame (U channel) and glue the glass to the frame and the frame to the tile. Clips on the other hand were designed (less than 2” square) not only to provide you with a frameless look, but for safety and health reasons. Every clip (clamp) that we sell or install or teach you how to install requires a notch in the glass so the clip can bolt through the glass panel and then anchored to the tile becoming one true fixed structure, not just glued to a thick piece of metal. No frame means no soap scum and bacteria build up that always grows around a frame. You will know what I mean if you happen to be one of our do-it-yourselfers when you remove your old shower doors .That smell and “stuff” you will see is not candy.
  5. Price. Other companies claim it costs much more to do a clip system then a U channel (framed) system. Not so, that is unless in fact you have to have another middleman (heavy glass fabricator) manufacture your (theirs) shower enclosure. We are the manufacturer of the original frameless shower enclosure system and we urge you to get a price from them and a price from us using a real frameless clip system. We are not only the lowest price; we are the innovators, manufacturers, distributors, and master designers and installers. The all important Headers…
     Everyone from contractors to designers and even some homeowners have this notion that the term ‘Frameless’ means no clips or headers or any fastener what so ever. This also can be no further then the truth. Each fastener has a purpose predicated on the design at hand. We will never build a frameless shower enclosure that YOU feel is safe. We have been doing this since day one. We are licensed glaziers with hundreds of combined years experience in structural design, fabrication and installation of heavy glass. You just can’t get what you want sometimes but I will promise you that if you choose us to design and install (or teach you how to do it yourself), you will be more than satisfied with our design we came up with just for you. Now let’s talk about headers. Header systems were the first and only frameless system we had all those years ago, and the truth is they are still the most secure way of enclosing a multi panel frameless enclosure with a door that is not bolted to the wall. Example being a large neo-angle or an enclosure where the door is centered between two knee walls. They also provide unmatched rigidity and in most cases eliminate flex all together. They are only 1 ¼” wide and only go across the top edges when absolutely needed. Please try and remember, we are the professionals and we really do know when you need one. They actually look really good when you don’t put u channel all over the place (see our neo-angle and 90 degree photo gallery). Notice you see no vertical wall U channel?
     The absolute only way we would sell you a U channel system (we never use them on our installs on the walls ever) is if your wall is a total disaster meaning you might have tried to be a tile guy and failed terribly…(see example).It is rarely the case but we have seen it all by now. Remember we are here to help, so let us.
     The original frameless shower doors are not only SGCC certified (see logo and certificate) manufacturers ,we are one of the nation’s oldest and largest fully licensed frameless shower door companies, designing and installing nearly 5000 custom frameless shower door and enclosures a year and growing( show vans and employees).With that being said, we know a thing or two about safely designing and installing frameless enclosures, as well as what frameless enclosure requires clips or a header and which do not. We hope and trust you will listen to our advice when it comes down to design choices and options available.
     We are so sure you will be happy you decided to work with us that we give all of our clients a free lifetime warranty on hardware and service if you choose to have us design, make and install your custom frameless enclosure at no charge. (see warranty).Nothing looks and functions better than an enclosure made, sold and or installed by "The Original Frameless Shower Doors"TM

  COLLAPSE [-]
• Are your frameless shower doors and enclosures truly frameless?
  Yes! Contrary to what you have been told or have read, you do not need u-channel anywhere. The absolute ONLY reason some shower door and glass companies push these ugly “U” channels is because they are not the manufacturers and most of them cannot teach you how to measure properly or they do not trust their glass manufacturer to cut the glass correctly, hence the “U” channel. We are the true manufacturers and innovators of the frameless shower door system. Each glass door has our name etched into it, as well as yours, proving it was custom made just for you by us. (Show Stamp) As well as inspected and SGCC certified and approved.

  COLLAPSE [-]
• What makes your sliding frameless doors so rigid?
  Our entire line of sliding frameless tub and shower doors are made with 3/8” thick glass. All of the hangers are drilled threw the glass, not just clamped on. All (except our standard line) are custom made by us using only the finest hardware made by the C.R. Laurence Company in Los Angeles, California.

  COLLAPSE [-]
• Should I use clear glass, frosted (acid mist) or a textured glass?
  Nothing opens up a bathroom like a clear glass frameless enclosure, especially if you have a small bathroom. For those of you that want or need privacy or you happen to have old tile you want to hide, than acid etch or a textured glass such as rain glass would be the way to go.

  COLLAPSE [-]
• Does a frameless shower enclosure leak?
  Simply put, a frameless shower door has no frame! All frameless doors and enclosures are designed to deflect water, no retain it. We not only are the manufacturers, we are one of the largest (if not the largest) installation companies in the nation. If our shower doors all leaked we would be out of business. As we stated, if you measure using our simple instructions and watch our videos you will have little to no leakage. Some common sense applies here. Do not use a hand held body spray to rinse off your frameless door. Make sure your sill, curb and/or ledge is pitched approximately 3/16” in towards the shower as well as all the other design tips we have provided for you. The only vulnerable (potential water leakage) area should be the door. All fixed panels are silicone inside and out and should never leak.

  COLLAPSE [-]
• What is safety tempered shower glass?
  All shower doors and enclosures must be safety tempered by law. Regular raw glass breaks into large, sharp chunks, where as safety tempered shower glass breaks into very small pieces. All of our fabrication is done by us, in house as well as safety tempering your frameless shower doors. We are SGCC certified (show stamp) and regularly send our glass out for testing to ensure you receive the highest quality obtainable. Always ask who tempers your glass and ask for a photo of their tempering logo that must be applied to each and every piece of glass by law. Look for the SGCC logo in small writing. This will ensure that you are getting the finest tempered (tested) glass available. Note: Once the glass goes through the tempered process, absolutely nothing can be done to it as far as fabrication applies. Any drilling, cutting or grinding of any sort will result in the glass shattering.

  COLLAPSE [-]
• What is the tempered glass fabrication and raw glass mean? How do you make a frameless shower doors?
  Glass fabrication or fabrication itself means to make something from raw materials, in our case glass. Our raw glass comes in large sheets that are cut by computer to your exact specifications. After the cutting process, the glass is then high polished by machine and mitered if need be. Next, your glass is marked, specifying where all the notches for all the hinges and clip placements will be attached. Your glass is then drilled on our dual sided diamond hydraulic drill press and custom notches can be made by hand at this point. All edges are polished smooth. Your glass then gets stamped with our tempered logo on it as well as engraving your name into the bottom edge of each piece and sent threw a high tech glass washing machine. The glass is then inspected for any flaws and then sent threw the tempering furnace. The final inspection is done and if approved, your glass is ready for the crating department or set up for installation.

  COLLAPSE [-]
• What is the difference between a framed and frameless shower enclosure?
  Everything! We invite you to view our before and after photo’s. Twenty years ago we had nothing but framed shower doors and enclosures. Now, with the help of our founder, all the ugly aluminum metal framing is a thing of the past. Our frameless designs are clean, safe, simple and elegant allowing a more open feel to the room as well as a more pleasurable showering experience. The old metal framed units have a simply become a thing of the past. They took way too much time and energy to install and the end result always looked like an industrial nightmare. The Original Frameless Shower Doors has over 200 combined years of glass fabrication and installation experience as well as the latest glass fabrication manufacturing specifically designed for the production of custom, one of a kind frameless shower doors. The end result is nothing short of a thing of beauty -- custom made by real artisans, factory direct to you, the end user, at wholesale prices. Why would you want a framed enclosure!

  COLLAPSE [-]
• How thick is the glass used in a frameless shower door and/or enclosure?
  The thinnest glass we use for all of our frameless shower doors and enclosures is 3/8” thick. Some of our textured glass we offer only comes 3/8” thick. We also use ½” thick glass. We usually recommend this heavier glass on larger enclosures for the mere reason of rigidity. We always will lead you in the right direction and will advise every client to use the thickness we recommend predicated on the enclosure design.

  COLLAPSE [-]
• What hardware style should I use when designing my frameless shower door and/or enclosure?
  Typically there are two styles to choose from without getting crazy. Square edge or rounded edge hardware and hinges. Square tends to flow better with a more contemporary flair which as the rounded is a more softer feel to the look. We highly recommend dressing your frameless enclosure up simply by choosing one of our beautiful sculptured handles made by the C.R. Laurence Company. We stock just about every style and finish available. This simple upgrade can change the entire look of the enclosure as well as adding a decorative towel bar.

  COLLAPSE [-]
• Why choose The Original Frameless Shower Doors to design, fabricate, install or ship you your frameless shower door and/or enclosure?
  We are the first and only custom frameless shower door company that has the experience, facility and technicians that can bring you a totally custom frameless shower enclosure factory direct from us, the true manufacturer, to you. We will help you from design to install ensuring you an experience you will not find anywhere else. Our installation department currently installs 5,000 custom frameless shower enclosures per year and growing [show photo]. Some of our master installers were moved from outside installations to in house customer service reps that solely work with you from the design stage all the way through and during the installation process. It’s like having a master frameless technician right there next to you in your bathroom helping you every step of the way.

  COLLAPSE [-]
• Does my price include hardware?
  Yes, all pricing includes all hardware needed for installation.

  COLLAPSE [-]
• What is the widest door I can have?
  The widest door is 36” inches. Anything wider than 28” will require heavy duty hinges and will have additional costs.

  EXPAND [+]
• Do I need to sign for the delivery?
  For all residential deliveries the carrier will contact you to set up an appointment. You must confirm the delivery date and time with the carrier. Our carrier requires all shipments to have a signature at time of delivery.

  EXPAND [+]
• Can I combine shipping?
  If you would like to order multiple enclosures we will combine shipping and crating costs. We will only combine costs if all units are purchased and shipped at the same time. Please contact our office for additional information on combining shipments.

  COLLAPSE [-]
• What will happen if my shipment is damaged?
  Please make note of any damage to the boxed item upon delivery. This is very important. If refusing delivery due to visible damage, please note “refused due to visible damage” on the receipt presented. The Original Frameless Shower Doors will replace any or all hardware as well as glass damaged at no cost to purchaser, only by providing proof of damage in the box in which it was sent/packaged in (photo’s required). All photos of damaged property must be emailed directly to the V.P. of Operations at Christi@fsdae.com or one of her assistants upon these findings. Please see our shipping policy for more information.

Over 25 years ago, the Original Frameless Shower Doors founder was the first to design and install a totally frameless glass shower enclosure.  Today, we install approximately 5,000 custom frameless shower doors and enclosures per year and growing.  We currently have over a dozen installation vans on the road with one master installer and one apprentice assistant at all times, making us one of the largest independently owned frameless shower door installation companies in existence.  With that being said, we know a thing or two about installing the product we innovated all those years ago.  You can expect the highest trained professionals in the industry to arrive at your home within the window of time prescheduled and confirmed with you the day of your installation.  All of our installations (South Florida residents) are backed by a free lifetime warranty.*  If your custom frameless shower door and/or enclosure ever leaks, squeaks, or if your hardware tarnishes or comes loose, simply call our office and we will send a crew out to your home to address your concerns and if need be, replace your hardware free of charge.

We are so confident in our work and our product that we can offer this guarantee for the lifetime of your enclosure, free of charge.  You can expect prompt courteous service as well as advice on how to maintain the luster of your new frameless shower doors so they look and perform perfectly for years to come.

For New York or Connecticut residents, we have a fantastic measuring and installation company we've used for over 15 years and would be happy to refer to you. This company was factory trained and certified personally by FSD, so we can ensure great quality with their service. Currently, they are servicing New York state in Putnam County, Westchester County, and all of New York City, as well as Farfield, Danbury, and Greenwich in Connecticut. Feel free to contact us and we'll be happy to pass along their information.

The benefits of having us install your frameless shower door and/or enclosure:

• Free in-home estimates and design consultations.
• From designing to helping with the decision on the hardware finish, as well as which style to choose from.
• We will advise you on the proper height of your new frameless enclosure as well as discussing all glass options available.
• We are responsible for the correct size and placement and measurements as well as the function of your new frameless shower enclosure.
• Guaranteed quickest turnaround time in the industry (approximately 48 hours from the time of purchase to scheduling department).
• Clean, neat, prompt and professional installation.
• Free lifetime service calls and lifetime hardware performance and finish guaranteed.
• Peace of mind knowing you just hired the finest technicians anywhere to design, fabricate and install your one of a kind American made frameless shower doors and enclosures.

How DFI Protects Glass

Coatings help protect all kinds of glass surfaces, from shower enclosures, windshields and exterior windows to etched glass, fine art glass and solar panels. Consumers and business buy glass to enhance the beauty of their homes, and business but what happens when glass is exposed to hard water, soap scum, sea salt and environmental elements? Once stains are on the glass, they are almost impossible to remove, unless the surface is protected with a low-maintenance coating.  

Although most glass appears to have a smooth surface, the reality is glass by nature has microscopic peaks and valleys in virtually every surface. By filling in rough surface with a protective coating, the areas becomes smoother, water repellent, more brilliant, impact, scratch and stain resistant and UV stable.

Protective coatings create a surface that repels water and the minerals it carries so fewer drops can stick to and dry on the glass, resulting in fewer spots. The benefit is less cleaning, a more hygienic surface and a cleaner environment where harsh chemicals are not used.

DFI patented easy-to-clean protective coatings improve and protect your glass surfaces with the features and benefits below:

• UV stable
• 100% optically clear
• Reduces cleaning by up to 90%
• 20% more brilliance
• Impact and scratch resistant
• Protection of the surface from stains, scratches and other damage
• A healthier environment by eliminating the need for harsh chemicals and cleaners
• Benefits for new or existing surfaces
• A more hygienic home by reducing mold and bacteria
• Revitalization to maintain “like new” performance, if desired, is easy and effective
• Protection from water, scratching and other environmental damage
• 10X more water repellent
• Patent-protected in over 40 countries worldwide

                                      Click here to see more!

What are the benefits of a Frameless Shower Door?

Modern shower designs have evolved through time and the traditional frame less shower doors and tacky shower curtains have been replaced by the up to date, elegant and chic shower doors of today.

Since most contemporary style bathrooms are usually visual and feature intricate bathroom fixtures and decorative tiles, frame less shower glass doors have been gaining fame among many homeowners.

Frameless shower doors are a type of shower door made with solid portions of glass with no trims supported by heavy-duty hinges for pivot type, and tracks for bypass/sliding type.

Selecting frame less or framed shower doors will depend on personal choice and budget. To help you decide, below are the pros and cons of purchasing and owning the modern frame less shower bath doors.

PROS
Made entirely of glass, they can easily make your bathroom look fresh and elegant. Its invisible appearance creates flowing space and a sweeping look that matches stylish bathroom designs, making the space seem much bigger and grander than it may be otherwise. Decorative tile designs and ornate lighting in the interior of the shower area are put on display as well.

Durability is reliable because thicker glass is used for it to support the panels that do not have the structural edge of aluminum framing. This kind of shower doors is easier to clean and can be restored to looking like new, due to the trackless design. Plus, the seal-in technology of frame less glass doors keeps the water from spilling out to the greater bathroom area.

Frameless Shower Enclosures Bring More Charm and Use to Your Home

A frameless shower enclosure always has its pluses. However, more than its being cheap and easy to maintain, it’s its ability to transform that makes it an excellent addition to any washroom or bathroom. A frameless shower enclosure can make it look European, Victorian, or modern. Would you like the taste of living in a hotel? Get yourself one.

Travel through Europe

There are a lot of people who are in love with the European way of life—they have consistently been elegant, sophisticated, and classic. All their pieces convey history and beautiful stories.

But traveling to Europe will cost you a lot. Not only will you have to pay for a very hefty plane fare, but you also have to think about your accommodation. Of course, you would like to spend on more comfortable hotels where you can be treated with a luxurious lifestyle.

With frameless shower enclosures, you can bring the ultimate European experience without spending thousands and even without leaving your home. For one, these types of enclosures are neat and sophisticated to look at. You can attribute it to their glass doors, which are actually very strong. They have been tempered and have passed through extensive test. A real frameless shower enclosure will always have the seal of approval.

Otherwise, the product could be fake, didn’t pass through the tests, or is brought to the United States illegally.

Let Your Bathroom Tub Stand Out

Is your bathroom tub have been sitting in the corner for a very long time? Does it solitude makes you feel alone or too boring? You can accessorize it with the use of a frameless shower enclosure. You can actually go for those retrofit units, so you can easily install the enclosure into the bathroom tub on your own. You can also make sure that it doesn’t tend to occupy a lot of space.

Live in a Contemporary Home

A frameless shower enclosure always denotes timely fashion. It makes any space modern yet classic at the same time. Because it’s made of glass, it gives you an impression that the entire bathroom has expanded—yes, the same kind of illusion provided by mirrors.

You can also attach shower columns inside the enclosures, especially if you want to recreate the usual spa salons that you can find in other countries. If you want to relax, you can also include a seat right inside the frameless shower enclosure, so you can just sit down while you’re being treated to a pseudo-sauna or spa. It may also have chair rails around.

With the various styles that you can come up with frameless enclosures, you want to make sure that you can get the best one. You can head down town to your favorite home depot, or you can shop online. The latter gives you the convenience of looking through wide variety of designs without ever having to leave your home. Moreover, the product can be delivered directly into your home and even have a professional installer help you out during setup.

                   Click here to get your FREE quote!

Modernize your bathroom with a frameless glass shower enclosure!

 More homeowners are looking to transform their bathrooms into luxurious, relaxing retreats that feature the looks and amenities of an upscale spa. One way to upgrade the appearance of a bath -- and to lessen the burden of maintaining it -- is to install a frameless shower enclosure with CLARVISTA(R) glass by PPG, a shower glass that features fused-on coating to keep its showroom looks longer than more traditional clear shower glass.
There are numerous advantages associated with frameless shower enclosures, ranging from practical to fashionable, and if they're done right, they can add to the overall value to your home, too. Here are a few reasons to consider a frameless shower for your new or remodeled bath.

* They're fashionable. Frameless shower enclosures open up a world of possibilities because they provide a perfect complement to durable, high-style surfaces commonly used in the bath, such as tile, marble and granite. They also provide a great way to show off the trendy shower heads, faucets and fixtures that have become so popular in contemporary bath design. Finally, because of their openness and transparency, frameless shower enclosures can make your bath feel bigger than it really is.

* They're versatile. Frameless doors can be designed to fit any space, making them ideal for bathrooms, large and small. And they don't have to be boxy, either. Frameless shower enclosures can be circular, oval or triangular in shape. Even standard square or rectangular enclosures can be dressed up with an artfully bowed, patterned or etched glass door.

* They're durable. Frameless shower enclosures look elegant, but one of their most redeeming qualities is toughness. Standard shower glasses can range in thicknesses from 3/8 to 1/2-inch, which makes them sturdy, structurally sound and safe. Watertight seals prevent leakage and, since there is little to no metal used in the construction of frameless enclosures, homeowners never have to worry about replacing corroded parts.

* They're easy to live with. Let's face it. We all want to live in our homes for as long as we can. Frameless shower enclosures are a great way to let your home age with you because the entry can be leveled with the floor to create easy access as we become older and less mobile. And here's the best part: you don't have to sacrifice looks or fashionability. Frameless glass shower enclosures are a great way to meld timeless style with ageless accommodation.

* They're easy to clean. With frameless shower enclosures, there are fewer nooks and crannies for dirt and grime to enter and accumulate. That makes them easier to clean. For an added level of clarity and sparkle, homeowners should request Clarvista glass by PPG. The coating for Clarvista glass is actually fused to the glass substrate, which makes the surface virtually impervious to corrosion from water deposits, humidity, soap scum and household cleaners. Simply wipe the wet glass down every few days with a dry towel or squeegee, and your shower enclosure can look as new as the first day you had it installed.

Water and Stain Resistant glass Free of charge!

All of our Frameless shower doors come equipped with a water, stain, and scratch resistant coating... Guaranteed lifetime protection!!

Frameless Shower Door. What is It?

The frameless shower door is definitely a step up.

In years past, you may have had a shower/tub with a shower curtain. Then, you stepped up to a framed shower door (a shower door that has thin metal framing on all four sides). Then, you may have thought: Well, a frameless shower door would certainly enhance the look of my bathroom. How about it?

Frameless Shower Door Basics

• Better Looking - Face it, frameless shower doors look great. It's a simple slab of thick tempered glass that pivots smoothly from the shower wall or a glass shower enclosure.
• Thicker Glass - Because frameless shower doors do not have the structural benefit of metal framing, the glass must be thicker. Glass is typically about a quarter-inch thick.
• Heavy - A 72" x 36" frameless door may weigh as much as 70 pounds. Compare to a framed shower door, which may weigh about 45-50 pounds.
• Expensive - Costs run from the $400 to the thousands. Framed shower doors easily will cost 40% less.
• Easier to Clean - Solid sheet of glass has no framing to impede cleaning.
• Difficult to Install - Because of the frameless door's excessive weight, care must be taken to ensure that it is securely installed--a task often best left to professionals.
• Left or Right Opening - Most frameless doors have the option of hinges being installed on either side--but don't assume so.
  

                                       Click here to get a FREE quote!

For a Seamless Bathroom Install a Frameless Glass Shower Door

Modern bathrooms are all about openness, fluidity, and flow. Their open designs attempt to bring together such disparate elements as decorative tile, contemporary bath fixtures and sprawling vanities. Traditional shower doors, with their hard lines and glaring frames, tend to work against that aesthetic by creating closed, defined spaces. Investing in a frameless glass shower door, on the other hand, helps to create a more open, seamless, and contemporary space.

What is a Frameless Glass Shower Door? 
A frameless glass shower door is a shower door made completely of glass. Since they don't need frames to support their weight or slide on, these doors almost universally operate by swinging open and shut on hinges. They are usually installed as part of a larger, frameless glass shower, and it's the lack of frames throughout that draw so many homeowners to this innovative shower design.

A Frameless Glass Shower Door is Almost Invisible
Perhaps the greatest selling point of these doors isn't their appearance, but their lack of one. In the never-ending battle to make bathrooms feel larger and more open, a shower door that is hardly noticeable at all makes a huge difference. Instead of a door that walls off a significant portion of your bathroom, a frameless shower door helps to incorporate your shower space into the greater bathroom area.

Decorative Tile and Your Frameless Glass Shower Door
Not only does the addition of frameless glass in your bathroom help it to feel more open and spacious, frameless showers also put your shower and bathroom tile design on display. That might sound a bit trivial, but when you consider the beauty of today's stone, ceramic, glass and pebble tiles, you can see why putting your tile on display can be a huge selling point with these innovative shower door designs.

Is a Frameless Glass Shower Door Safe? A question that many homeowners ask when they start looking into frameless shower doors is whether the glass is safe if the edges aren't hidden by a protective frame barrier. The answer is a definitive yes. Frameless glass edges are filed down to a smooth surface that presents no danger to anyone climbing in or out of your shower. And since glass showers are made of tempered glass they are also very difficult doors to shatter or break.

Talk to a Specialist about Installing a Frameless Shower Door
Anyone with the construction know-how to install bathroom fixtures and lay tile has the skills to install a frameless style shower door. Make sure you're honest with yourself about your abilities before you tackle this job, however. Remember, your shower door is a primary barrier preventing shower and tub moisture from reaching the rest of your bathroom. A poorly installed door can lead to shower leakage and, in turn, cause a slew of moisture related problems such as water damage, rot, and the development of mold and mildew. With these kinds of risks at stake, it's always a wise decision to hire out the installation of a frameless glass door to someone who knows what they're doing.

                                                        
                                            Click here to get a FREE quote today!

Choosing Frameless Shower Doors when Remodeling Your Bathroom

Q: I’m considering upgrading my exiting shower door to a frameless shower door.  What is involved in the process?
A: The first thing to consider is whether or not your existing shower door is a good candidate for an upgrade to a frameless.  When the existing door has been removed, you’ll notice discoloration on the tiles and multiple holes where the original door was fastened to the wall.  This is by no means a deal breaker, but something to consider that many home owners do not realize. After a customer has decided to upgrade, we will remove their old shower door and dispose of it. The customer will then have a few days before we install their new frameless shower door to clean their tile and apply grout or sealant to the existing holes.
 

Q: What are the advantages of buying frameless rather than framed?
A: Outside of the visual appeal of a frameless shower door, there are several benefits to consider when making a purchase. Frameless shower doors can be easier to maintain since the glass makes direct contact with your tile and eliminates corrosion that builds up on the metal track of it’s framed counterpart. Additionally, all of that vertical metal can really detract from your beautiful tile work you want to show off. Properly installed frameless applications are more rigid with the addition of heavier, thicker glass and heavy-duty hardware. That same hardware allows the door to open to the inside as well as the outside swing you’ll find on a framed shower door. Most homeowners see a better return on their investment since the frameless system is much more desirable to new homebuyers. Lastly, a frameless shower door allows for much more creative flexibility when matching your plumbing fixtures, choosing a specific height or coordinating a particular style to your bathroom project.

Q: I want to install my new frameless shower door myself; can you supply the glass needed?
A: Installing a frameless shower is not recommended as a DIY project because frameless glass shower installation is a fine art with extremely small tolerances to provide a leak proof glass shower enclosure.  The slightest error could result in gummy caulking, ugly gaskets, or worse – a glass enclosure that leaks all over your bathroom floor.  To get it perfect, installation needs to be exact.  Also, the slightest chip in the safety glass can cause it to shatter, leaving you with a very expensive mess to clean.  This is one project you will want to call in a professional glass installer.

Q: Are there special products I need to clean my glass?  How often will I need to clean it?
A: To keep your glass free of potentially damaging water spots, we recommend using a squeegee after each shower.  Using a squeegee on a daily bases is the most simple and fastest way to avoid water spots and mineral deposit build-up on your new shower enclosure.  Using a surface protector, such as Rain-X, to protect your glass is highly recommended.  A surface protector can help to repel water off the glass, but is not intended to replace the use of a squeegee.  For permanent protection, consider Showerguard (see below for more information).  For the hardware on the glass, use a non-ammonia glass cleaner – it is the only glass cleaner that is safe to use on hardware because, over time, ammonia can damage your hardware.

Q: What is ShowerGuard?
A: ShowerGuard involves a patented technology that seals the glass surface during the manufacturing process to stop corrosion before it starts and protect the beauty of the surface.  Eventually, spray-on products wear off (i.e. Rain-X for your car window).  Because ShowerGuard is used in manufacturing the glass, this protection becomes part of the glass itself, so there is never a need to reapply protection.  Shower after shower and year after year, your glass will stay clear and beautiful. Guardian ShowerGuard has a lifetime warranty.  

Q: Why do some frameless shower doors have a green tint?
A: Clear glass contains a significant amount of iron, which gives it the appearance of a light green tint.  Starphire or UltraClear glass is super heated to eliminate the iron from the glass, which gives the glass a crystal clear quality.  This type of glass is recommended for anyone who wishes to highlight the natural tile colors of their shower enclosure.

Why Frameless shower doors are cost-effective solution for every bathroom?

Today shower is a bit like a spacecraft, in which there are many features and capabilities. It has become much more than a place where you can just take a shower – now it is a place for relaxation.

You can take a Turkish bath, enjoy the whirlpool or just sit in the bathroom and listen to music in the soft light of halogen lamps. And types of doors also vary a lot, but only Frameless shower doors can create a clean, modern, and attractive look.

Thanks to nowadays technology glass cockpit is highly hygienic and only eco-friendly material are used for its construction. If you want to make your bathroom an enjoyable place, then Frameless glass shower doors are a great choice, as they are practical and durable.

Frameless shower doors give depth, light and a feeling of freedom of space in the bathroom. Today, they are in great demand as for the villa owners and residents of small apartments.

                               Click here to read more